Schnell Technology

Schnell Reinforcement processing equipment

Schnell Technology

You need to upgrade your Flash Player

Get Adobe Flash player

romanian languageLimba Romana | english languageEnglish Language

Multipurpose centres
Bar Wiser 28 Dual Imprimare Email
(7 votes, average 2.71 out of 5)
Marţi, 23 Martie 2010 13:55

Bar Wiser 28 Dual schnell machine rebar processing multipurpose centres BAR WISER 28 is an extremely powerful profiling- stirrup bending machine with two bending heads to machine steel rods from bars. It has a machining capacity of up to 28 mm Ø single (#8), 20 mm Ø double (#6) or 12 mm Ø triple (#4). Because BAR WISER 28 is so flexible and powerful, it is particularly suitable for medium- to large-sized profiling centres as a substitute for the more traditional cutting bench and bending robot or, in general, centres whose aim is sorting onboard the machine. Thanks to the optional storage carriage, bars and profiles of different diameters and dimensions can automatically be classified. The carriage is automatically controlled by the machine control software.

 

 

In addition:
The two bending units with which it is equipped allow:
> increasing productivity because the dead times for head transfer from the upper to the lower working line are eliminated
> making ‘simultaneous bends’: the two bending heads operate almost simultaneously on the respective working lines.
>automatic bar loading with the 'GENIUS' application: the operator is transformed into a process controller;

 

Technical data:

 

BAR WISER 28
Single strand up to:  8 ÷ 28 mm #3 ÷ #8
Double strand up to:  8 ÷ 20 mm #3 ÷ #6
Triple strand up to:  8 ÷ 12 mm #3 ÷ #4
Max.bending angle: 180° 180°
Central mandrels Ø:  40 ÷ 200 mm 1 5/8" ÷ 7 //8"
Max pulling speed: 142 m/min 466 ft/min
Max bending speed: 476°/sec 476°/sec
Average power consumption: 16 kW/h 16 kW/h
Working pressure: 7 bar 90/100 psi
   
BAR WISER 28 S
Single strand up to:  8 ÷ 25 mm #3 ÷ #8
Double strand up to:  8 ÷ 20 mm #3 ÷ #6
Triple strand up to:  8 ÷ 12 mm #3 ÷ #4
Max.bending angle: 180° 180°
Central mandrels Ø:  40 ÷ 200 mm 1 5/8" ÷ 7 //8"
Max pulling speed: 142 m/min 466 ft/min
Max bending speed: 476°/sec 476°/sec
Average power consumption: 16 kW/h 16 kW/h
Working pressure: 7 bar 90/100 psi

 

 

ACCESSORIES:

 

Genius automatic loader Genius_automatic_loader

completely automatic bar loading without operator.

 

 

 

Multi-compartment translating forge:

allows changing from one diameter to another in a few seconds, considerably reducing Compartment

production times.

 

 

Stock Master:

The stock-master system (the first two elements of the fixed handling line) ensures constant Stock_Master

availability of bar bundles at cutting plane height even if several bundles are stored in each

section.

 

 

Entry rack Double Deck

Schnell has created an innovative bar feeding station. The novelty is in the structure of the Entry_rack_Double_Deck

“Double Deck” station as a moving feeding device stands over a fixed stocking element.
Thanks to the introduction of such improvement it is possible to:
- stock bundles of bars without hampering the feeding process of the upper station,
- save space in the shaping centre,
- reduce station feeding time.

 

Chain collecting and unloading carriage BW

The carriage allows automatic classification of the bars and profiles, also of different BW

diameters and dimensions. Characterised by chain feeders and storage racks, it is

automatically managed by the machine control software.

 

 

Bidimensional bar code reader

It allows to load the processing programs into the machines. Bidimensional_bar_code_reader.



Ultima actualizare în Vineri, 26 Martie 2010 10:59
 


You are here  : Home Rebar processing Multipurpose centers

Technical help

Please contact us
for any questions

Products Overview

Design template Schnell Products Overview

Documentation

We offer full documentation for all machines.

Technical forum

 Joomlart Forum You consult with the best

Support:

Call:  0040 21 780.30.23
contact us by e-mail