Integrated plant to cut, optimize, stock and handle the bars, suitable for mass productions, based on a shear CGS 300, mounted on a fixed frame, with blade of 300 mm (12''), VBM1 measuring and cutting track with mobile ledge, with one-side unloading.
Automatic rebar bending station with no. 1 bending unit, able to bend automatically in 1 direction and manually in 2 directions, it is perfect for those who have a considerable quantity of bars bent to one only side or for those who have to process very short pieces bent to both sides. It is equipped with wide feeding track consisting of motorised and rubber-coated rollers, bar loaders and unloaders, one stop plate to array the bars, mobile clamp on the horizontal arm, bar lifting platforms, operation by means of servomotors, ejection cylinder to remove the tools from the toothed part. Capacity with mandrel-backstop: n° 1 bar Ø 40mm; n° 2 bars Ø 36mm.
The automatic bending robot mod. RoboClassic allows the making of shapes or stirrups of any kind. It shapes with positive bends on both sides can automatically and simultaneously be produced. It is equipped with wide feeding track consisting of motorised and rubber-coated rollers, bar loaders and unloaders, 2 bending units, one fixed and one mobile2 bending units, one fixed and one mobile, one stop plate for zeroing the bars for each bending unit, Capacity with mandrel: n° 1 bar Ø 40mm; n° 2 bars Ø 32mm.
OPTI-BAT cutting bench is a highly productive machine, the ideal solution for factories facing large numbers of small and medium-sized orders. It is especially designed for processing housing material. 'Optibat' cutting work stations are fitted with a second transfer unit parallel to the cutting unit. In this way, cut bars can be distributed along the roller ways to optimise utilisation. This means that the same roller way can be used to store different orders. In practice, it is rather like having many more roller ways available to ensure maximum cutting optimisation and thus reduce offcut quantities.