Schnell Technology

Schnell Reinforcement processing equipment

Schnell Technology

You need to upgrade your Flash Player

Get Adobe Flash player

romanian languageLimba Romana | english languageEnglish Language

Coiled wire processing
Formula Sapiens Imprimare Email
(2 votes, average 5.00 out of 5)
Vineri, 26 Martie 2010 12:05

Formula Sapiens schnell machine coiled wire processing automatic stirrup benders This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 14 mm or double Ø 10 mm. Its main features are the wide stainless steel front panel and the two servomotors on the driving unit which permit the machine to work at a maximum speed of 144 m/min. It is equipped with a stirrup collecting flap, wire inlet unit, and Sapiens Technology which makes the straightening system completely automatic. Formula Sapiens can produce a 200x200 mm stirrups in about two seconds which means 3,600 stirrups per hour with double wire.

 

 

 Technical data:

  

Formula Sapiens
Single strand up to: 6 ÷ 14 mm #2 ÷ #4
Double strand up to: 6 ÷ 10 mm #2 ÷ #3
Max.bending angle: 180° 180°
Central mandrels Ø:  20 ÷ 70 mm 3/4" ÷ 2 3/4"
Max pulling speed: 144 m/min 475 ft/min
Max bending speed: 1950°/sec 1950°/sec
Bending distance: 1650 mm 5'-5"
Average power consumption: 4 kW/h 4 kW/h
Working pressure: 7 bar 90/100 psi
Ultima actualizare în Vineri, 26 Martie 2010 12:14
 
Prima 16 Imprimare Email
(1 vote, average 1.00 out of 5)
Vineri, 26 Martie 2010 12:01

Prima 16 schnell machine coiled wire processing automatic stirrup benders This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 16 mm or double Ø 12 mm. It is equipped with wire inlet unit and offers all the advantages of 'Sapiens technology' and digital servomotors.

 

 

 

 

 

Technical data:

 

PRIMA 16
Single strand up to:  6 ÷ 16 mm #2 ÷ #5
Double strand up to:  6 ÷ 12,7 mm #2 ÷ #4
Max.bending angle: 180° 180°
Central mandrels Ø:  20 ÷ 100 mm 3/4" ÷ 4"
Max pulling speed: 84 m/min 275 ft/min
Max bending speed: 1258°/sec 1258°/sec
Bending distance: 1650 mm 5'-5"
Average power consumption: 6 kW/h 6 kW/h
Working pressure: 7 bar 90/100 psi
 
Coil 16 Imprimare Email
(1 vote, average 5.00 out of 5)
Vineri, 26 Martie 2010 11:58

Coil 16 schnell machine coiled wire processing automatic stirrup benders This bidirectional automatic stirrup bender allows to produce stirrups and cut-to-size bars using wires of up to Ø 16 mm or double Ø 12 mm. It is equipped with a stirrup collecting flap, wire inlet unit, and Sapiens Technology which makes the straightening system completely automatic.

 

 

 

 

 

Technical data:

 

COIL 16
Single strand up to:  6 ÷ 16 mm #2 ÷ #5
Double strand up to:  6 ÷ 12,7 mm #2 ÷ #4
Max.bending angle: 180° 180°
Central mandrels Ø:  20 ÷ 100 mm 3/4" ÷ 4"
Max pulling speed: 108 m/min 354 ft/min
Max bending speed: 1680°/sec 1680°/sec
Bending distance: 1650 mm 5'-5"
Average power consumption: 6 kW/h 6 kW/h
Working pressure: 7 bar 90/100 psi
 
Coil 20 Imprimare Email
Vineri, 26 Martie 2010 11:52

Coil 20 schnell machine coiled wire processing automatic stirrup benders Dual-direction stirrup bender apt to process both hot and cold-drawn steel in coils. Coil 20  is one of the most powerful stirrup benders world-wide. Thanks to its capacity to process two Ø 16 mm wires and one Ø 20 mm, it is particularly suitable for large rebar processing plants. It is equipped with multiple external straightener with specific lines, bars collecting flap and wire inlet unit.

 

 

 

 

Technical data:

 

COIL 20
Single strand up to:  8 ÷ 20 mm #3 ÷ #6
Double strand up to:  8 ÷ 16 mm #3 ÷ #5
Max.bending angle: 180° 180°
Central mandrels Ø:  25 ÷ 100 mm 1" ÷ 4"
Max pulling speed: 105 m/min 345 ft/min
Max bending speed: 840°/sec 840°/sec
Bending distance: 1850 mm 6'-1"
Average power consumption: 7 kW/h 7 kW/h
Working pressure: 7 bar 90/100 psi
 
Hyper 16 Imprimare Email
Miercuri, 24 Martie 2010 16:41

Hyper 16 coiled wire processing straightners Motorized hyperbolic straightener, working 8 mm up to 16mm diameter coils.
The equipment is provided with a 'flying' cutting system, which allows to cut the straightened wire without breaking down the working cycle, in order to increase the plant’s productivity and to achieve the best possible precision.

 

 

 

 

Technical data:

 

HYPER 16
Single strand up to: 8 ÷ 16 mm #2 ÷ #5
Max pulling speed: max 100 m/min 350 ft/min

 

Ultima actualizare în Joi, 25 Martie 2010 14:51
 
Mai multe articole..


Pagina 2 din 3
You are here  : Home Coiled wire processing

Technical help

Please contact us
for any questions

Products Overview

Design template Schnell Products Overview

Documentation

We offer full documentation for all machines.

Technical forum

 Joomlart Forum You consult with the best

Support:

Call:  0040 21 780.30.23
contact us by e-mail